Inject/repair caravan floor
Injecting a caravan floor? Do you have a caravan floor that has sagged, or a springy caravan or camper floor?
Then it is high time to have the caravan or camper floor injected. If you allow the problem to persist for too long and do nothing about it, the chance of a cost-reducing floor injection becomes increasingly difficult or even impossible and the floor will eventually have to be replaced, or at least part of it. This is a major repair and the longer you wait it becomes more and more expensive.
Injecting caravan floor.
A caravan floor consists of different parts of material, a sandwich plate a top layer with an insulation layer of PUR or EPS foam in between and a bottom plate underneath. This whole is glued together to form a solid caravan or camper van floor. Over time, the layers may separate from each other. The floor will then sag locally, often near the entrance and at the kitchen sink, but can also occur in places where people often walk or stand in the interior. You will then notice unevenness and subsidence in the caravan or motorhome floor. The floor then starts to ‘spring’: and in several places it seems as if the floor is sagging, then it is high time to inject the caravan floor. In addition, it can occur in Caravan or camper due to moisture penetration often due to an old leak or age of the caravan. Once the Caravan or camper floor is injected properly, the floor will be like new again after repair.
🔗 Also see our main caravan repair page for more information on specific damage cases.
Be timely and get your caravan or camper floor injected.
In this way, the caravan or camper floor will look like new again: and you will have a sturdy and strong floor that you can enjoy for years to come.
You can request advice and/or a cost estimate from us for this work without any obligation. Click here for the contact form.
